Garage floor coatings in Boise built for hot tires and hard winters.
Your garage takes more abuse than any other concrete in the house — vehicles, road salt, dropped tools and Boise's freeze-thaw swings. Our full-flake garage floor coatings are installed to handle all of it, across Boise and the Treasure Valley.
A garage floor that works as hard as you park on it.
Garage concrete in the Treasure Valley deals with a specific set of problems: hot tires after a summer drive up Highway 55, de-icing salts tracked in all winter, and slabs that have settled or cracked over the years. Every garage we coat starts with mechanical diamond grinding and careful crack and surface repair, so the system bonds to sound, properly profiled concrete — not to dust and old paint.
Many residential garage floors can be completed in as little as one day, depending on concrete condition, repairs, moisture conditions, weather, and the coating system selected. Return-to-service times vary by product, project and conditions, and your expected schedule will be included with your project estimate.
Built for real garage life, not a showroom photo.
Engineered for hot tires
Full-flake polyurea and polyaspartic systems are built for daily vehicle traffic and the heat tires carry in from the road.
Handles Idaho winters
Road salt, sand and snowmelt rinse away instead of soaking into bare concrete and pitting the slab.
1-day installation available
Many residential garages can be completed in a single day, depending on concrete condition, repairs, moisture, weather and the system selected.
A brighter, cleaner garage
Light-reflective flake blends make the whole space feel bigger, and oil or fluid drips wipe up instead of staining.
Wide range of flake blends
Flake colors matched to your home's palette, from desert neutrals to cool Idaho grays.
Clear written estimate
Square footage, prep, repairs, system and schedule — written out before we book, so there are no surprises.
How we coat a Boise garage floor, step by step.
- Step 1
Free on-site evaluation
We measure, look at the condition of your concrete, and walk you through color and flake options in your own garage.
- Step 2
Diamond grinding
Mechanical concrete preparation opens and profiles the surface so the coating bonds properly.
- Step 3
Crack & surface repair
Cracks, pits and spalls are repaired and reground flush before any coating goes down.
- Step 4
Pigmented basecoat
A pigmented basecoat is applied edge-to-edge, then flake is broadcast into it.
- Step 5
Scrape & vacuum
Loose flake is scraped and vacuumed for a smooth, consistent finish underfoot.
- Step 6
Topcoat & cleanup
A clear topcoat locks the flake in, and we leave the space clean. UV-stable topcoat options are available depending on the system selected.
Local to Boise, trusted across the Treasure Valley.
Owned and operated in Idaho. Locally owned in Boise, with mechanical concrete preparation, full-flake systems and a clear written estimate before work begins.
- Boise, ID
- Meridian, ID
- Eagle, ID
- Nampa, ID
- Star, ID
- Kuna, ID
- Caldwell, ID
- Garden City, ID
- Middleton, ID
- Emmett, ID
Garage floor coating questions we hear in Boise.
How much does a garage floor coating cost in Boise?+
It depends on square footage, the condition of your concrete, and the system you choose. We measure on site and send a clear written estimate.
Can you coat a garage in one day?+
Many residential garage floors can be completed in as little as one day, depending on concrete condition, repairs, moisture conditions, weather, and the coating system selected. Return-to-service times vary by product, project and conditions, and your expected schedule will be included with your project estimate.
My garage floor is cracked and pitted. Can it still be coated?+
Usually, yes. Cracks, pits and spalls are repaired and reground flush as part of the preparation. If we ever see a slab that isn't a good candidate for coating, we'll tell you that honestly during the evaluation.
Do you grind or acid-etch the concrete?+
We use mechanical concrete preparation with diamond grinding. Proper surface profiling is one of the biggest factors in how a coating performs over time.
Will road salt and snowmelt damage the floor?+
The sealed full-flake surface is easy to rinse and mop clean, and it keeps salt and meltwater from soaking into and pitting the concrete underneath.
Do you put the scope in writing?+
Always. You get a written estimate covering preparation, the coating system, colors and the expected schedule before we book the job.